-Language-

Products

Product name:

UOTEK Gigabit network signal lightning protection

Model: UT-N201G/UT-N204G/UT-N208G/UT-N216G/UT-N224G

 Protection level: IP20 

 Rated current: 0.5A 

 Housing material: Galvanized steel/aluminum alloy 

 Installation: The surge protector is connected in series between the protected device and the signal channel 

 Failure mechanism: The communication line is short-circuited to ground or the communication line is disconnected. 

 Operating environment: Temperature -40+85℃, relative humidity≤95%(25℃)

    UT-N2XXG series gigabit network lightning protection series products are mainly used in TCP/IP protocol communication network to protect electrical and electronic equipment signal lines from the influence of lightning electromagnetic pulse, induced overvoltage and operation overvoltage, and are widely used in communication and security monitoring, transportation, industrial control and other fields of communication line protection. This series of products has the characteristics of high transmission rate, extremely fast response time, low insertion loss, low residual voltage, etc., and has a good lightning protection effect without affecting the normal communication of the equipment.

<
specification UT-N201G UT-N204G UT-N208G UT-N216G UT-N224G
Operating voltage (Un) 5V
Nominal discharge current (In) 3kA
Maximum flow capacity (Imax) 5kA
Protection level (Up) 20V
Transmission rate 1000Mbps
Response time 1ns
Insertion loss 0.5dB
Connector form RJ45
protection line 1/2, 3/6, 4/5, 7/8
Number of protected circuits 1 4 8 16 24
Dimensions 80*40*32mm 83*74*29mm 155*95*28mm 485*86*45mm
protection level IP20
rated current 0.5A
Housing Material Galvanized steel/aluminum alloy
Installation The surge protector is connected in series between the protected device and the signal channel
failure mechanism The communication line is short-circuited to ground or the communication line is disconnected
operating environment Temperature -40+85, relative humidity≤95%(25)