Product name: UOTEK DC Power Surge Protector
Model: UT-10-12/UT-10-24/UT-40-48/UT-40-200
● Remote signal definition (optional): NC-COM: Turn off, COM: Common point, NO-COM: Turn on
● Failure indication: Green; Normal; Red: Failed
●Response time (ta): 25ns
● Dimensions: 90*36*65mm
● Protection level: IP20
● Preposed fuse: 40Agl/gg
● Protection mode: +/PE, -/PE
● Flame retardant level: V0/red
● Installation method: 35mm DIN rail installation
● Operating environment: Temperature -40~+85℃, relative humidity≤95%(25℃), height≤3km
	
	 
 
	
| Model | UT-10-12 | UT-10-24 | UT-40-48 | UT-40-200 | 
| Operating voltage (Un) | 12VDC | 24VDC | 48VDC | 200VDC | 
| Max. operating voltage | 24VDC | 30VDC | 85VDC | 320VD | 
| Nominal discharge current (In) | 5kA | 20kA | ||
| Maximum flow capacity (Imax) | 10kA | 40kA | ||
| Protection level (Up is In) | ≤100V | ≤150V | ≤350V | ≤1200V | 
| Access wire area | ≥4 mm2 | ≥6 mm2 | ||
| Remote Signal Definition (Optional) | NC-COM: turn off, COM: common point, NO-COM: turn on | |||
| Failure indication | Green: Normal; Red: Failed | |||
| Response time (tA) | 25ns | |||
| Dimensions | 90*36*65mm | |||
| Protection level | IP20 | |||
| Preposed fuse | 40AgL/gG | |||
| Protection mode | +/PE, -/PE | |||
| Flame retardant level | V0/red | |||
| Installation method | 35mm DIN rail installation | |||
| Operating environment | Temperature -40~+85℃, relative humidity≤95%(25℃), height≤3km | |||